GATE

-
The Graduate Aptitude Test in Engineering (GATE) is  all-India examination that primarily tests the comprehensive understanding of various undergraduate subjects in engineering and science. GATE is conducted jointly by the Indian Institute of Science, Bangalore and the seven Indian Institutes of Technology (Bombay, Delhi, Guwahati, Kanpur, Kharagpur, Madras and Roorkee) on behalf of the National Coordination Board – GATE, Department of Higher Education, Ministry of Human Resources Development (MHRD), Government of India.

The GATE score of a candidate reflects the relative performance level of a candidate. The score is used for admissions to various post-graduate education programs (e.g. Master of Engineering, Master of Technology, Doctor of Philosophy) in Indian higher education institutes, with financial assistance provided by MHRD and other government agencies. Recently, GATE scores are also being used by several Indian public sector undertakings (i.e., government-owned companies) for recruiting graduate engineers in entry-level positions. It is one of the toughest and most competitive examinations in India.
 
 Validity of GATE Score Card-2015 are three years

Various PSU in India are offering jobs with good pay on the basis of Gate score card and interview.
some of the companies and research institute are

  • BHEL
  • ONGC
  • BARC
  • POWERGRID
  • BPCL
  • IOCL
  • HPCL
  • CEL 
  • COAL INDIA
  • MDL
  • NTPC
  • PSPCL
  • OPGC
  • NHPC
  • NBCC
  • NHAI




Comments

Post a Comment

Popular posts from this blog

QUESTION BANK OF MACHINE DESIGN II FOR UPTU

-
                                                  UNIT-1  1. Derive the expression of beam strength of a spur gear tooth.  2. Derive the expression for efficiency of worm wheel drive.  3. What is virtual or formative gear?   4. Describe the law of gearing. Why involute teeth are preferred over cycloidal teeth? What is the reason of interference in gears and how it can be avoided?  5. Using a suitable schematic diagram explain the forces acting on worm gears. Also, define normal pitch, helix angle and efficiency of worm gear drive.  6. Briefly discuss the following: (i) System of gear teeth (ii) Pressure angle  7. Discuss the classification of helical gears.  With a neat sketch explain the forces acting on a helical gear and explain.  8. With the help of a sketch, explain how an axial thrus...
Read more

strength of material question

-
1.if arod expand freely due to heating .it will develop. a.Bending stress b.Thermal stress c.No stress d.compressive stress 2.materials which show direction dependent properties are called a.homogenious b.viscoelastic c.isotropic d.anisotropic 3.if apiece of material neither expand nor contract in volume when subjected to stress then the  poisson ratio must be a.zero b..25 c..33 d..5 4.what is the relationship between elastic constants E,G, and K a.E=KG/9K+G b.E=9KG/K+G c.E=9KG/K+3G d.E=9KG/3K+G 5.maxium shear stress in a mohrs circle a.is equal to radius of mohrs circle b.is greater than radius of mohrs circle c.is less than radius of mohrs circle d.could be aby the above.
Read more

tips for gate exam

-
1. Uniqueness in their study material: Study material provided by the coaching institutes is of little assistance if they are compact copy-paste or rewrite of materials taken from other books. If the reading of such material doesn’t increase interest and enjoyment then they are not worth it. There are plenty of standard books on each subject by good authors, which can make your study enjoyable during preparation. 2. Collection of quality books in their library: During the process of theory conceptualization and building application capabilities, you need good books, which can really put your brain on exercise. Check out their library! 3. Flexibility in the Coaching Model: What happens when your pace of learning is much faster or slower than the average? Is there any mechanism by which the model can identify exactly where you need help and provide the same? Is it possible in that coaching model to minimize the wastage of your time? 4. Quality of questions discussed: Number of questions...
Read more