About gate exam

-
Graduate Aptitude Test in Engineering (GATE) is an all India examination that primarily tests the comprehensive understanding of various undergraduate subjects in Engineering and Technology. GATE is conducted jointly by the Indian Institute of Science and seven IIT's (IIT Bombay, IIT Delhi, IIT Guwahati, IIT Kanpur, IIT Kharagpur, IIT Madras and IIT Roorkee) on behalf of the National Coordination Board – GATE, Department of Higher Education, Ministry of Human Resource Development (MHRD), Government of India. The GATE Score of a candidate reflects the relative performance level of a candidate. The score is used for admissions to various post-graduate programmes (e.g. M.E., M.Tech, direct Ph.D.) in Indian higher education institutes with financial assistance provided by MHRD and other Government agencies. The score may also be used by Public sector units for employment screening purposes.

Recruitment through GATE

PSUs in India, for long, have had troubles conducting their recruitment processes with more than 100,000 students giving the exams for less than 1000 jobs (A selection rate of less than 1%). After sensing the exponential rise in the number of engineering students in India who wish to "land" a PSU job, the PSUs have decided that GATE score shall be the primary criteria for initial shortlisting. This change was the primary cause for the rapid increase in applicants for GATE 2012.
IOCL was the first PSU which successfully tested out this system and was followed, two years later by NTPC, IOCL & Powergrid.
Usually these companies release their recruitment notifications right after GATE notification, indicating that candidates have to take GATE to be considered for a job in their organizations.

[edit]History of Oranizing Institutes

YearOrganizing Institute
1990IISc Bangalore
1991IIT Madras
1992IIT Delhi
1993IIT Bombay
1994IIT Kharagpur
1995IIT Kanpur
1996IISc Bangalore
1997IIT Madras
1998IIT Delhi
1999IIT Bombay
2000IIT Kharagpur
2001IIT Kanpur
2002IISc Bangalore
2003IIT Madras
2004IIT Delhi
2005IIT Bombay
2006IIT Kharagpur
2007IIT Kanpur
2008IISc Bangalore
2009IIT Roorkee
2010IIT Guwahati
2011IIT Madras
2012IIT Delhi
2013IIT Bombay

Comments

Post a Comment

Popular posts from this blog

QUESTION BANK OF MACHINE DESIGN II FOR UPTU

-
                                                  UNIT-1  1. Derive the expression of beam strength of a spur gear tooth.  2. Derive the expression for efficiency of worm wheel drive.  3. What is virtual or formative gear?   4. Describe the law of gearing. Why involute teeth are preferred over cycloidal teeth? What is the reason of interference in gears and how it can be avoided?  5. Using a suitable schematic diagram explain the forces acting on worm gears. Also, define normal pitch, helix angle and efficiency of worm gear drive.  6. Briefly discuss the following: (i) System of gear teeth (ii) Pressure angle  7. Discuss the classification of helical gears.  With a neat sketch explain the forces acting on a helical gear and explain.  8. With the help of a sketch, explain how an axial thrus...
Read more

strength of material question

-
1.if arod expand freely due to heating .it will develop. a.Bending stress b.Thermal stress c.No stress d.compressive stress 2.materials which show direction dependent properties are called a.homogenious b.viscoelastic c.isotropic d.anisotropic 3.if apiece of material neither expand nor contract in volume when subjected to stress then the  poisson ratio must be a.zero b..25 c..33 d..5 4.what is the relationship between elastic constants E,G, and K a.E=KG/9K+G b.E=9KG/K+G c.E=9KG/K+3G d.E=9KG/3K+G 5.maxium shear stress in a mohrs circle a.is equal to radius of mohrs circle b.is greater than radius of mohrs circle c.is less than radius of mohrs circle d.could be aby the above.
Read more

tips for gate exam

-
1. Uniqueness in their study material: Study material provided by the coaching institutes is of little assistance if they are compact copy-paste or rewrite of materials taken from other books. If the reading of such material doesn’t increase interest and enjoyment then they are not worth it. There are plenty of standard books on each subject by good authors, which can make your study enjoyable during preparation. 2. Collection of quality books in their library: During the process of theory conceptualization and building application capabilities, you need good books, which can really put your brain on exercise. Check out their library! 3. Flexibility in the Coaching Model: What happens when your pace of learning is much faster or slower than the average? Is there any mechanism by which the model can identify exactly where you need help and provide the same? Is it possible in that coaching model to minimize the wastage of your time? 4. Quality of questions discussed: Number of questions...
Read more